• Image of 510 bumper mount tow hook (Drivers side)
  • Image of 510 bumper mount tow hook (Drivers side)
  • Image of 510 bumper mount tow hook (Drivers side)
  • Image of 510 bumper mount tow hook (Drivers side)
  • Image of 510 bumper mount tow hook (Drivers side)

Functional track day ready tow hook that integrates with the factory bumper and bracketry. Perfect for recovering your car from an off-track excursion. Stylish design that doesn't distract from the clean lines of the 510 front end. 2" x 1.5" oval opening.

A lowered 510 w/ an air dam is nearly impossible to reach an effective front tow point without damage. Designed to mount through the narrow opening between the front valance and bumper brackets. Tow point is spaced directly under the front bumper, with no protrusion past the front. Should fit all 69-73 models, bumper bracket holes must be angled. If your brackets do not match the one shown this will not fit. The bumper brackets help reinforce the bracket and add strength. If running no bumper or brackets this hook will not work. Bumper must be removed for install.

Machined in the USA from aircraft grade high strength 7075 aluminum. Includes two new longer 10.9 rated flange head bolts and washers for easy installation. Bumper and bracket must be removed to install.

Recommended max load is 500lbs, plenty to pull a 510 out of any sticky situation. (Tested to 2000 lbs without failure)

Disclaimer: Not intended for all towing/tiedown situations, straight pulls only, severe side loading and abuse will lead to possible failure and vehicle damage.

Bare machined finish or polished at extra cost.

Sold Out